Electrónica y controles

Output jack damaged

Impaired output Jack describes deteriorated output jack. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Defective soldering

defective welding describes defective welding. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Insufficient ground

Poor mass describes poor mass. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Worn or contaminated potentiometer

Worn or contaminated potentiometer describes Worn or contaminated potentiometer. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Defective selector

defective selector describes faulty selector. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Capacitor or failed passive component

Capacitor or broken passive component describes capacitor or broken passive component. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Wiring incorrectly configured

Circuit wiring incorrectly describes circuit wiring incorrectly. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Five-position selector wiring incorrect

five-position selector incorrectly wired describes five-position selector incorrectly wired. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Incorrect potentiometer value for pickups

potentiometer of inadequate value for pickups describes potentiometer of inadequate value for pickups. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Incorrect potentiometer curve

Inadequate potentiometer curve describes inadequate potentiometer curve. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Push-pull defectuoso

Defective push-pull describes defective push-pull. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Intermittent kill switch

Kill switch intermittent describes trigger switch intermittent. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Incorrect use of stereo jack in mono circuit

Jack stereo incorrectly used in mono circuit describes stereo jack incorrectly used in mono circuit. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Ground loop created by connected shielding

Connected shielding creating mass loop describes connected shielding creating mass loop. It can affect electronics and controls and its scope is determined by comparing the symptom with the geometry, system and actual state of the instrument.

Battery compartment with intermittent contact

Battery compartment with intermittent contact describes a battery compartment with intermittent contact. It may affect electronics and controls, and its scope is determined by comparing the symptom with the geometry, system, and actual condition of the instrument.

Three-position toggle switch

Three-position switch with contact bounce describes a three-position switch with contact bounce. It may affect electronics and controls, and its scope is determined by comparing the symptom with the geometry, system, and actual condition of the instrument.

Rotary selector with intermittent positions

Rotary selector with intermittent positions describes a rotary selector with intermittent positions. It may affect electronics and controls, and its range is determined by comparing the symptom with the geometry, system, and actual condition of the instrument.

Super Switch wiring with incorrect logic

Super Switch wiring with incorrect logic describes super switch wiring with incorrect logic. It may affect electronics and controls, and its scope is determined by comparing the symptom with the geometry, the system, and the actual condition of the instrument.

Faulty contact switch

Free-Way switch with defective contacts describes a free-way switch with defective contacts. It may affect electronics and controls, and its scope is determined by comparing the symptom with the geometry, system, and actual condition of the instrument.

Centered potentiometer with touching axes

Potentiometer with touching axes describes a potentiometer with touching axes. It may affect electronics and controls, and its scope is determined by comparing the symptom with the geometry, the system, and the actual condition of the instrument.

No-load potentiometer that does not disconnect

No-load potentiometer that does not disconnect describes a no-load potentiometer that does not disconnect. It may affect electronics and controls, and its scope is determined by comparing the symptom with the geometry, system, and actual condition of the instrument.

Volume pot with excessive high-end loss

Volume pot with excessive high-end loss describes a volume pot with excessive high-end loss. It may affect electronics and controls, and its scope is determined by comparing the symptom with the geometry, the system, and the actual condition of the instrument.

Tone pot without useful range

Tone pot without useful range describes a tone pot without useful range. It may affect electronics and controls and its range is determined by comparing the symptom with the geometry, the system, and the actual condition of the instrument.

Tone capacitor with incorrect value

Tone capacitor with incorrect value describes tone capacitor with incorrect value. It may affect electronics and controls and its scope is determined by comparing the symptom with the geometry, the system, and the actual condition of the instrument.